Kärcher K 4-130 Pressure Washer manual

The Kärcher K 4-130 is a powerful pressure washer designed for efficient cleaning of various surfaces. It features a 130 bar pressure, a water flow rate of 420 liters per hour, and is equipped with a range of accessories for versatile cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Pressure Washer 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: High-pressure hose, spray gun, adjustable nozzle, detergent tank, and wheels for mobility.

Feature	Description
High-pressure hose	Durable hose for high-pressure cleaning
Spray gun	Ergonomic design for comfortable use
Adjustable nozzle	Allows for different spray patterns
Detergent tank	Built-in tank for easy detergent application
Wheels	For easy maneuverability

Installation

Unpack and inspect contents. Place the pressure washer on a flat surface.

Connect the high-pressure hose to the spray gun.
Attach the other end of the hose to the pressure washer.
Connect the water supply hose to the water inlet.
Plug the pressure washer into a power outlet.

WARNING! Ensure all connections are secure before use.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

Fill the detergent tank with appropriate cleaning solution.
Adjust the nozzle to the desired spray pattern.
Test the pressure washer on a small area before full use.

CAUTION! Always wear protective gear while operating.

Specifications

Pressure: 130 bar.
Flow Rate: 420 liters per hour.
Power: 1800 watts.
Weight: 12 kg.
Hose Length: 6 meters.
Detergent Tank Capacity: 1 liter.
Operating Temperature: Up to 40°C.

Controls and Settings

Access controls via the spray gun and pressure settings on the unit. Adjust the nozzle for different spray patterns.

Safety Features: Automatic shut-off when not in use, thermal protection.

Connecting Devices

Connect the water supply hose to the water inlet. Ensure the hose is securely attached.

Turn off the water supply before connecting.
Check for leaks after connecting.

Tip: Use a hose with a compatible diameter for best performance.

Operating the Pressure Washer

Follow these steps to operate the pressure washer effectively.

Turn on the water supply.
Power on the pressure washer.
Press the trigger on the spray gun to start cleaning.
Adjust the nozzle as needed during operation.

WARNING! Do not point the spray gun at people or animals.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the filter and check hoses for wear.

CAUTION! Unplug and disconnect water supply before maintenance.

Safety Information

Read all safety instructions before use. Keep children and pets away from the area while operating.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No pressure	Blocked nozzle	Clean or replace the nozzle.
Water leaks	Loose connections	Tighten all connections.
Motor does not start	Power supply issue	Check power outlet and cord.
Detergent not dispensing	Clogged detergent line	Clean the detergent line.

Reset: Disconnect power for 10 seconds to reset.