Kärcher HD 6-13 CX Plus Pressure Washer manual

The Kärcher HD 6-13 CX Plus is a high-performance pressure washer designed for efficient cleaning of various surfaces. It features a powerful motor, adjustable pressure settings, and a compact design for easy maneuverability. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating Instructions 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: High-pressure hose, adjustable spray lance, detergent tank, and ergonomic handle.

Feature	Description
High-pressure hose	Durable and flexible for extended reach
Adjustable spray lance	Allows for different spray patterns
Detergent tank	Integrated tank for easy detergent application
Ergonomic handle	Designed for comfort during use
Compact design	Easy to store and transport

Installation

Unpack and inspect contents. Place the pressure washer on a stable surface.

Connect the high-pressure hose to the machine and the spray gun.
Attach the water supply hose to the water inlet.
Ensure the detergent tank is filled if using detergent.
Plug into a power outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

Adjust the pressure settings according to the surface being cleaned.
Test the spray pattern by activating the spray gun.
For detergent application, switch to the detergent mode.

CAUTION! Always wear protective gear while operating.

Specifications

Power: 1300W motor.
Pressure: Up to 130 bar.
Flow Rate: 6 liters per minute.
Weight: 12 kg.
Hose Length: 8 meters.
Detergent Tank Capacity: 1 liter.
Operating Temperature: Up to 40°C.

Controls and Settings

Access the pressure settings via the control panel. The spray lance can be adjusted for different spray patterns.

Safety Features: Automatic shut-off, thermal protection, and pressure relief valve.

Connecting Accessories

Connect various accessories such as brushes and nozzles for different cleaning tasks.

Turn off the pressure washer before changing accessories.
Ensure the accessory is securely attached before use.

Tip: Use the appropriate accessory for the surface to avoid damage.

Operating Instructions

Follow these steps for effective cleaning:

Turn on the water supply and power on the pressure washer.
Adjust the spray lance to the desired setting.
Activate the spray gun to begin cleaning.
Switch to detergent mode if necessary.

WARNING! Do not point the spray gun at people or animals.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filters and check for wear on hoses and connections.

CAUTION! Unplug and disconnect the water supply before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No pressure	Blocked hose/filter	Check and clean the hose and filter.
Water leakage	Loose connections	Tighten all connections.
Motor not starting	Power supply issue	Check the power outlet and cord.
Unusual noise	Worn components	Inspect for damaged parts and replace if necessary.

Service: For further assistance, contact Kärcher support.