Kärcher HD 3-7-35 Pb-1-575-154-0 Pressure Washer Manual

The Kärcher HD 3-7-35 Pb is a powerful pressure washer designed for efficient cleaning of various surfaces. With a maximum pressure of 3500 PSI and a flow rate of 7 liters per minute, this machine is ideal for both residential and commercial use. It features a durable design, easy maneuverability, and a range of accessories to enhance cleaning performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: High-pressure hose, spray gun, adjustable nozzle, detergent tank, and sturdy wheels for mobility.

Feature	Description
High-pressure hose	Durable and flexible for easy maneuverability
Spray gun	Ergonomic design for comfortable use
Adjustable nozzle	Allows for different spray patterns
Detergent tank	Built-in tank for easy detergent application
Wheels	Sturdy wheels for easy transport

Installation

Unpack and inspect contents. Place the pressure washer on a stable surface.

Connect the high-pressure hose to the spray gun and the machine.
Attach the water supply hose to the water inlet.
Fill the detergent tank if necessary.
Plug into a power source.

WARNING! Ensure all connections are secure before use.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

Check water supply: Ensure the water source is turned on.
Set the desired spray pattern using the adjustable nozzle.
Test the pressure washer on a small area before full use.

CAUTION! Always wear protective gear when operating.

Specifications

Model: Kärcher HD 3-7-35 Pb
Max Pressure: 3500 PSI
Flow Rate: 7 L/min
Power Source: 120V AC
Weight: 25 kg
Dimensions: 40 x 30 x 90 cm
Hose Length: 10 m
Warranty: 2 years

Controls and Settings

Access controls via the spray gun and pressure settings on the machine. Adjust pressure settings according to the surface being cleaned.

Safety Features: Automatic shut-off when not in use, thermal protection to prevent overheating.

Connecting Accessories

Connect various accessories such as brushes and extension wands for enhanced cleaning.

Turn off the pressure washer before changing accessories.
Ensure the accessory is securely attached before use.

Tip: Use the correct accessory for the surface to avoid damage.

Operating the Pressure Washer

Follow these steps to operate the pressure washer effectively.

Turn on the water supply.
Start the pressure washer and select the desired pressure setting.
Begin cleaning by aiming the spray gun at the surface.
Adjust the nozzle as needed during operation.

WARNING! Do not point the spray gun at people or animals.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the filter and check for wear on hoses and connections.

CAUTION! Unplug the machine before performing maintenance.

Safety Information

Read all safety instructions before use. Always wear protective eyewear and gloves.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No pressure	Water supply issue	Check water supply and connections.
Leakage	Damaged hose	Inspect and replace damaged hoses.
Machine won't start	Power supply issue	Check power cord and outlet.
Unusual noise	Blocked pump	Inspect and clear any blockages.

Reset: Follow the reset procedure in the manual if available.

Service: Contact Kärcher support for assistance.