Kärcher BD-373539 Pressure Washer Manual

The Kärcher BD-373539 is a powerful pressure washer designed for efficient cleaning of various surfaces. With a maximum pressure of 2000 PSI and a flow rate of 1.3 GPM, it is ideal for tasks such as cleaning patios, driveways, vehicles, and outdoor furniture. The unit features an adjustable spray nozzle, built-in detergent tank, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: High-pressure hose, adjustable spray wand, detergent tank, and built-in storage for accessories.

FeatureDescription
2000 PSI PressurePowerful cleaning capability for tough stains
1.3 GPM Flow RateEfficient water usage for effective cleaning
Adjustable Spray NozzleCustomizable spray patterns for different surfaces
Built-in Detergent TankConvenient storage for cleaning solutions
Lightweight DesignEasy to transport and maneuver

Installation

Unpack the pressure washer and inspect all components. Place the unit on a stable surface.

  1. Connect the high-pressure hose to the spray gun and the pressure washer.
  2. Attach the water supply hose to the water inlet.
  3. Fill the detergent tank if using detergent.
  4. Plug the unit into a grounded outlet.

WARNING! Ensure all connections are secure before operating.

First-Time Setup

Power on the pressure washer and follow the instructions for initial setup.

  1. Turn on the water supply and check for leaks.
  2. Set the desired spray pattern using the adjustable nozzle.
  3. Test the pressure washer on a small area before full use.

CAUTION! Always wear protective gear while operating.

Specifications

Controls and Settings

Access the controls on the pressure washer for adjusting pressure and spray settings. The spray gun features a trigger lock for safety.

Settings: Adjust pressure using the nozzle and select detergent mode if applicable.

Connecting Accessories

Connect various accessories such as brushes or extension wands for enhanced cleaning.

  1. Ensure the pressure washer is off before connecting accessories.
  2. Match the accessory to the spray gun and secure it.

Tip: Use the appropriate accessory for the task to achieve the best results.

Operating the Pressure Washer

Follow these steps to operate the pressure washer effectively.

  1. Turn on the water supply and power on the unit.
  2. Press the trigger on the spray gun to start cleaning.
  3. Adjust the spray pattern as needed during operation.
  4. Turn off the unit and water supply after use.

WARNING! Do not point the spray gun at people or animals.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filter and check for wear on hoses and connections.

CAUTION! Unplug the unit before performing any maintenance.

Safety Information

Read all safety instructions before operating the pressure washer. Always wear protective eyewear and gloves.

Troubleshooting

SymptomPossible CauseCorrective Action
No pressureWater supply issueCheck water supply and connections.
LeaksLoose connectionsTighten all connections and inspect hoses.
Unit won't startPower supply issueCheck power cord and outlet.
Inconsistent sprayClogged nozzleClean or replace the nozzle.

Service: For further assistance, contact Kärcher customer support.

Kärcher BD-373539 Pressure Washer Manual © - All Rights Reserved 2026